Category: News

The arrival of winter invariably brings with it traffic problems not only on mountain roads, but also in areas affected by heavy snowfalls. Unfortunately, this makes it very easy for vehicles to lose traction while driving on the snow and end up going off the road, or crashing into other vehicles.

 

In such situations, the equipment used to clear snow from roads, yards, and urban centers so as to quickly restore traffic circulation, plays a vital role. Among the machines designed by U.Emme specifically for this purpose, is the V-Type Snowplow. This adjustable blade is a true all-round piece of equipment thanks to its four different options of working setup: angle to the left or right, wedge, horizontal, and spoon. I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

 

The different tilting options are possible thanks to two robust wings that can be independently moved through two double-effect hydraulic cylinders. The possibility to angle the blade to the left or right allows users to employ the blade in a traditional manner, that is, to clear the road by moving the snow to the roadside. The wedge setup is used to open and widen deep snow. The blade basically behaves as a an icebreaker, hence the name plow.

 

Horizontal and spoon setups are instead used in storage areas to move or compact the snow previously collected. LV snowplow: one single piece of equipment for multiple applications

The Pantera Angle Broom by U.Emme is an iconic piece of equipment that hasn’t been changed in almost twenty years because it combines simplicity and performance with a clearly balanced cost-effectiveness ratio.

 

Even though it looks quite basic, the Pantera Angle Broom is equipped with excellent features that allow users to carry out multiple road maintenance operations easily and quickly. From a technical standpoint, Pantera is a bucket-less sweeper that can be angled up to 30° to the left or right.

Thanks to a mechanical tilting system, it provides three different fixed positions, but it can also be specified with an optional hydraulic tilting system consisting of two double-effect cylinders, solenoid valve, and standard electric kit.

The standard equipment of this sweeper includes two different types of brushes: brushes made entirely of polypropylene and brushes made of a polypropylene/steel mix.

The Pantera sweepers are ideal to quickly clear the roads from debris that are moved to roadside ditches thanks to the sweeper angle. In particular, the sweepers equipped with polypropylene/steel mixed brushes are able to effectively remove moss from interlocking modular flooring.

 

Furthermore, Pantera makes it is possible to effectively remove shallow snow, thus becoming a valid alternative to traditional snowplows.

Thanks to its robust structure, the Pantera Angle Broom can be mounted on Telehandlers, Backhoe Loaders, and Medium-Large Loaders.

 

By equipping Pantera with hydraulic lift and self-levelling system, this angle broom can be coupled with machines having a fixed mounting plate such as tractors, or multiutility equipment such as Unimog and Bremach.

U.Emme was founded in 1978 as a manufacturer of excavator arms for tractors and backhoe loaders, and has been producing these tools ever since. However, throughout the years, the increasing popularity of mini and midi excavators, has contributed to a significant decrease in sales in certain countries.

 

The manufacturing of Digging Buckets to complement its Excavator Arms, was a somewhat marginal activity for U.Emme. However, over the years, the growing demand for these easy-to-use yet essential tools, has lead the company to consider the possibility to further diversify its production of digging buckets, developing their application also on mini and midi excavators.

 

Unlike many competitors, that shifted from building digging buckets to developing hydraulic equipment, U.Emme decided to do the opposite. The company extended the manufacturing quality it is renowned for on the market of earthmoving equipment, to a complete range of Digging Buckets in different sizes and types, that can be mounted on excavators weighing 0.6 to 11 tons. There are as many as nine types: Tilting Buckets, Rake Riddle Buckets, Micro Trenching Buckets, Skeleton Buckets, Rippers and Multirippers, Ditch Cleaning Buckets, and V Buckets, along with a complete line-up of standard Digging Buckets.

 

Such a wide offering was made possible by the collaboration with certified partners capable of providing the same quality standards of the raw material that U.Emme has always used to manufacture its products. This is indeed an essential feature that combined with the experience and expertise provided during the design stage and through every step of production, contributes to the development of high-quality products.

The snow is beautiful to look at when it falls from the sky and whitens the landscapes of our marvelous country, but nothing more. Heavy snowfalls cover the streets of urban and extra-urban areas, hindering traffic circulation.

 

To facilitate road maintenance operations and the restoration of mobility, U.Emme presents its own range of snow blowers: YETI STD. Yeti STD snow blowers are two-stage machines equipped as standard with ice-breaking serrated augers in HARDOX®, a material that minimizes the wear caused by gravel and stones that may be mixed with snow.

 

The standard equipment includes a bolted cutting edge in tempered steel, a set-up for the bolted mounting plate—a clever feature that makes it possible to secure the plate to several pieces of equipment—,and height-adjustable skid shoes.

 

Every model can be specified with snow discharge chimney and flap that can be adjusted hydraulically, electrically, or mechanically. The last two options allow for the use of the snow blower also on equipment with a very limited oil flow rate. Sturdy and powerful, Yeti STD has been designed to be coupled with mini loaders, small wheel loaders and rigid or articulated backhoe loaders, and small telehandlers.

 

It is the perfect equipment to remove large amounts of snow from roads and yards easily and effectively.

During the fall and in colder months, the need for maintenance does not disappear. On the contrary, it often intensifies, becoming crucial in order to prepare the fields to house new machinery for the next blooming season.

 

Among the many operations to be done, there is the removal of plants that have ended their life cycle.
To carry out such maintenance operations, you need specific tools that allow you to work in the easiest, fastest, and most effective way possible.

 

U.Emme recommends one of its most efficient products, the BM-XL Grapple Bucket, ideal to load large amounts of material in a safe and secure manner, thanks to the standard blocking valve.

 

All the models of the BM-XL range can be equipped with a bolt-on kit of side panels to increase the bucket capacity, as well as a double-bevel edge to prevent the bucket wear.

 

The standard equipment includes a sturdy clamp operated by two powerful hydraulic cylinders and HARDOX slides welded below the bucket to protect the bottom against wear.

Designed and developed for intensive use in the farming and forestry industries, the Kela Log Grab with horizontal cylinder is the perfect ally to carry out maintenance, green area clearing, and gardening operations.

 

All the models in the series are extremely robust and feature thick plates that allow for their use with industrial equipment such as excavators and backhoe loaders.

 

The standard equipment of the Kela Log Grab includes a blocking valve, located on the hydraulic cylinder, that keeps the closing position of the claws firmly and solidly secured. Every model in the range also features claws with a wide maximum opening so as to pick up and load large amounts of material.

 

Finally, if you choose one of the three models of hydraulic rotator with 360° rotation available, you can equip every Kela Log Grab with a kit to split the hydraulic functions and use only two lines, instead of the required four.

Winter is right around the corner, and along with it come all the difficulties related to road maintenance due to the presence of snow and ice. It is important to have equipment that allows us to effortlessly clear and restore the road surface.

 

For this reason, U.Emme offers its customers the Yeti Snow Blowers to allow them to face winter and the problems that come with it in an easy and practical manner.

 

The Yeti range includes two models of front-mount snow blowers, namely STD and HD, designed to be coupled with skid-steer loaders, loaders, backhoe loaders, and telehandlers to remove large amounts of snow easily and effectively.

 

In particular, the front-mount two-stage STD model is equipped as standard with ice-breaking helixes in HARDOX®, so as to minimize the wear caused by gravel and stones, often mixed with snow.

 

The snow blower can be specified with discharge chimney and flaps that can be adjusted hydraulically, electrically, or mechanically. The last two options allow for the use of YETI STD even on machines with a limited oil flow rate.

 

Robust and powerful, YETI STD makes it possible to effectively remove snow from roads and yards. The Yeti HD Snow Blower, instead, is powered by a high-performance piston hydraulic motor equipped with torque limiter, a device that prevents the possibility of damage caused by the accidental entry of objects hidden in the snow that could get stuck in the rotating helix.

 

Every model is equipped with snow discharge chimney, hydraulically-adjustable flaps, and ice-breaking helixes in HARDOX®.

 

Recently, U.Emme has designed and placed on the market a variant of the HD series, called Yeti HD-I. This snow blower is independently powered by a state-of-the-art Power Pack Perkins, conceived to allow owners of backhoe and wheel loaders to use the snow blower even if they do not have auxiliary hydraulic equipment that is powerful enough to ensure the optimum use of traditional snow blowers. Yeti HD-I is equipped with torque limiter to prevent accidental damage caused by objects hidden in the snow and ice-breaking helixes in HARDOX®.

 

The standard equipment consists of snow discharge chimney, hydraulically adjustable flaps, and framing to support the Power Pack, the transmission assembly, and the 102L fuel tank.

 

The framing is attached to the host machine through a coupling system for pallet forks with a 165x70mm internal section. There are also two hoses to connect the auxiliary equipment to the host machine and power the hydraulic motor that allows for the hydraulic rotation of the snow discharge chimney.

Especially suitable for compacting sand or gravel to prepare the road surface for paving, this Vibratory Roller is an essential tool for soil compaction.

 

The Vibratory Roller RCVL is an extremely powerful and high-performance machine equipped with a direct drive bi-directional hydraulic motor that operates through an elastic coupling with the rotating shaft.

 

The standard equipment of each model includes important components such as the adjustable scraper for drum cleaning, a self-leveling system with a ± 15° self-leveling range, and twelve noise reduction silencers for vibration damping (six on each side).

 

The range also includes accessories that can enhance the standard features of RCVL, namely a pressure watering kit complete with 125L tank, a 12V electric pump and rod with spray nozzles, and a bolted height- adjustable dozer blade.

 

The Vibratory Roller is designed to be coupled with skid-steer loaders, rigid or articulated wheel loaders, backhoe loaders, and small telehandlers. Upon request, each model can be specified with linkage plate mounted off- center to the right so that the drum only covers the wheel or track marks left on the right side during operation.

U. Emme designs and sells snow blades that can be turned into dozer blades using specific devices. Let’s see how! The range of snow blades by U.Emme includes two historic series, the LS and the LSA.

 

Their main difference lies in the height of the moldboard and the reinforcement grid on the back of the moldboard, only present on LSA models which, due to the widths available in the range, are more suitable for coupling with large skid-steer loaders and small to medium-sized loaders and backhoe loaders.

 

The right calendering of the moldboard makes it possible to get unrivalled efficacy during snow removal operations thanks to a whirling motion from the bottom up that facilitates the side exit of the snow collected, thus avoiding an unpleasant “dozer effect”.

 

In addition to the horizontal self-leveling function, both series have an important feature, namely a spring-return antishock system on the moldboard which is very useful when working on a road surface covered in snow. In this case, if the blade accidentally encounters an obstacle, such as a curb, the moldboard bends forward but, thanks to the back springs, immediately returns to its initial position.

 

In addition, the two models feature fixing rods that make it possible to turn the snow blades into dozer blades, which are useful to perform small backfilling and excavation works, thus transforming a typically winter tool into a machine that can be used all year round!