U.EMME SNOW BLADES ARE USEFUL FOR ANY WORK REQUIREMENT

The range of Snow Blades manufactured by U.Emme is wide and includes variable set-up V- plows, snow blades with antishock system on individual sectors, and blades with antishock system on the entire moldboard.

 

In particular, by means of specific devices, it is possible to turn these blades into Dozer Blades that can be used all year round and not just in winter.

 

Let’s take a closer look at these Snow Blades.

 

The LS/LSA SNOW BLADES feature a moldboard calendering system that makes it possible to remove the snow through a whirling motion from the bottom up, facilitating the side exit of the snow collected. In addition to the horizontal self-levelling feature, both models are equipped with a spring-return antishock system, fixing rods to override the antishock system to carry out small backfilling operations, and hydraulic cylinders to angle the blade left or right.

 

The LSV SNOW BLADES are perfect to be coupled with large industrial and farming machines. They are equipped with horizontal self-levelling feature, spring-return antishock system on three lower sectors of the blade, and hydraulic cylinders to angle the blade left or right provided with antishock valve.

 

Each type of mounting plate is secured to the snow blade with attachment bolts. Finally, the range of Snow Blades by U.Emme also includes V-TYPE SNOWPLOWS featuring five different options of working setup: 35° angle to the left or right, horizontal, wedge, or spoon. The two robust wings can be independently moved by means of two double-effect hydraulic cylinders.

 

These V-plows are equipped with horizontal self-levelling feature and spring-return antishock system on two sectors of the blade. The standard equipment is supplied by four hydraulic lines. However, a kit is also available with solenoid valve to split the hydraulic circuit and hence use only one inlet and one outlet port.